### OBSDATE ### 20120901 ### LOGDATE ### 120901 ### OBSERVERS ### ACR ### WEATHER ### ok ### LOCATION ### MQ ### PROGRAM ### Sco-Cen binaries ### SIDEROSTATS ### n3 s3 ### TARGETS ### Pi-Sco (cal) fringes at -300um (V^2 up to 0.4) Tau-Sco fringes at -320um (V^2 up to 0.2 Rat up to 0.7 cart rate at 270) mu02-Sco(cal) fringes at -330um (V^2 up to 0.3 Rat 0.3 cart speed 170) At this point I realised that the shutter server was dead and no shutter sequences were happening. Followed the bugshooting page to fix it Pi-Sco (cal) fringes at -300um (fringes about as good as first obs) Shutter server still not working, what actually happened was PAVO couldn't move the shutters. .Eventually fixed it with some help from Ben by restarting PAVO. Pi-Sco (cal) fringes at -340um (V^2 up to 0.7 rat up to 0.6 cart speed at700) Now it's all working Tau-Sco fringes at -330um (V^2 above 0.2 rat consistently above 0.4 cart speed 515) Mu02-Sco (cal)fringes at -360um V^2 as above Pi-Sco (cal) fringes at -330um Tau-Sco fringes at -330um Mu02-Sco (cal) Tau-Lib fringes at -360um V^2 above 0.25 Rat above 0.2, but intermittent Pi-Sco (cal) Tau-Sco mu02-Sco (cal) fringes now at -380um Tau-Lib fringe found after a bit at -360um, had to search at 3 rather than 6 to find them. Quite intermittent, couldn't get a full set so took a shutter sequence after 40 seconds integration. Pi-sco (cal) fringes at -330um tau-sco fringes at -320um seeing has definitely gotten worse, data is not as good as the beginning of the night. mu02-sco (cal) -390um Tau-Sco Pi-Sco (cal) Tau-Sco Mu02-Sco (cal) ### QUALITY ### Very good (several calibrated points) ### PROBLEMS ### Lots of issues relating to recent power outage. Communication problems between PAVO and the shutter control server.