### OBSDATE ###
20120903

### LOGDATE ###
120903

### OBSERVERS ###
YK

### WEATHER ###
Clear
RH (open): 0.0% (SUSI), 31.0% (ATCA)
RH (close): 94.0% (SUSI), 65.0% (ATCA)

### LOCATION ###
ROCS (Sydney)

### PROGRAM ###
SUSI & MUSCA binaries

### SIDEROSTATS ###
 n3  s1   

### TARGETS ###
bet Lup (cal)
eps Lup (tar)
gam Lup (tar)
del Lup (cal)


### QUALITY ###
Very good (several calibrated points)  

### PROBLEMS ###
- Taskmaster (gtk) could not be opened from ROCS. Immediate remedy, ssh to peleas and
  launch from there (as observer).
- North aperture (apgtk) gave a "Aperture Bad" message when I tried to insert it into
  the North beam. I wanted check the alignment of the North and South beams using the
  LEDs at the sids.
- Found out that the SBIG message port 3006 was taken up a "deslogind" service. Need to
  fix this!
- Always getting "Got PAVO_CAMERA_STATUS with wrong data"
- Can only escaped the opcon no-drive-thru without any "cab reset" problem if cart's current position is >12.4m and <10.8m

- NB: Fringes found at -500um