### OBSDATE ###
20131210

### LOGDATE ###
131211

### OBSERVERS ###
YK (Garching)

### WEATHER ###
Clear; RH~46%

### LOCATION ###
Other

### PROGRAM ###
Nova Cen 2013

### SIDEROSTATS ###
 n3    s3 

### TARGETS ###
HR 2326 (Canopus)
HR 2553 (tau Pup)

### QUALITY ###
  Quite bad (no/almost no useful data

### PROBLEMS ###
* Fake Canopus fringes have very high SNR (~6, sometimes even 10)
* Fringes not found with HR 2553 (probably separation of the binary is just right for this baseline?)
* While switching to another star, the cable cart became stuck. It refuses to move and wants a 'cable reset' each time it is commanded. It responds to the "set rate" command (only with rate <20mm/s) but inspections with the vidmon camera show the cart in the same position after 'moving' for a long enough time.



Offsets:
N3 = -29", -144"
S3 = -3", -159"