### OBSDATE ###
20150321

### LOGDATE ###
150322

### OBSERVERS ###
YK (Perth)

### WEATHER ###
Clear, humidity ~70%, temperature ~20C

### LOCATION ###
Other

### PROGRAM ###
To check the state of SUSI after Mike H's visit.

### SIDEROSTATS ###
n1 n3 n4 s1 s2 s3 s4

### TARGETS ###
Nil

### QUALITY ###
  Quite bad (no/almost no useful data

### PROBLEMS ###

Cannot connect to N1 and S1. None of the siderostats could be connected. Network pings indicated “Destination Host Unreachable”.
Gave several ‘restart_sid’ commands but did not work.

Vidmon N display is stuck at N1. Restarted the server process on peleas but did not fix the problem. The display was completely black even when vidmongtk indicated that the camera was “ON”. There was no error logged into /usr/local/susi/tmp/vidmon_n.err by the server process.

Vidmon S ran without error.

Both metrology lasers indicated “Heat” problem. Opcon can only use the South laser. Metrology signal on both sides looked ok from metrologygtk. Using only the North or both lasers made the estimated OPD drifted randomly. Power cycling the lasers did not help.

LDC and PICO which were not working during the last check worked this time.