### OBSDATE ###
20150331

### LOGDATE ###
150401

### OBSERVERS ###
YK (Perth)

### WEATHER ###
Initially clear, but later became cloudy

### LOCATION ###
Other

### PROGRAM ###
Autocollimation

### SIDEROSTATS ###
n1   s1   

### TARGETS ###
Nil

### QUALITY ###
  Quite bad (no/almost no useful data

### PROBLEMS ###
Remounted both network drives on argus. Perhaps it had came back up from a recent reboot. Power failure?

Restarted pppd process to n1 and s1.

North metrology signal was lost when I found it.
South metrology signal was ok.

Failed to start astromod with ‘taskmaster’. N1, S1 and LDC complained that they could not open astromod file. Disk mounting seemed fine on all ‘ark’s and argus. Started astromod manually on peleas and then manually set them to track.

Pavo camera cooled to -10C although command given was ‘coolon -45’.

The sky became cloudy when all systems were ready. Turned to internal source for autocollimation.

Red and green lasers were not visible on PAVO. Status of the lasers on K108 looked normal.
Toggled filter wheel and shutters to check for blockage. Alignment LEDs at siderostats were visible on PAVO. Very likely nothing is blocking the laser from shining out. How do we know if the IPPower was up and running?