| REMOBS - NORMAL | REMOBS - RFI |
|---|
| After Logging onto YONDER as remobs | ||||||
| YONDER > xhost +leon +neol +nemesis | ||||||
| YONDER > telnet leon {as self} | ||||||
| LEON > set host LEON | ||||||
| LEON > remobs {as observer} {YONDER,TCPIP,AUTO} | ||||||
| NOEL > |
CAOBS > | NEMESIS > xhost +caccc | CAMON > /baseline | VIS > sel 12,34,56 {or 45AA, etc. try shortest baseline} | WINDS > /xs | |
| NOEL > |
CAOBS > | NEMESIS > rlogin caccc -l corr | CAMON > | VIS > dpa-t | WINDS > | |
| NOEL > |
CAOBS > | CACCC > setenv DISPLAY yonder:0.0 | CAMON > | VIS > time utc | WINDS > | |
| NOEL > |
CAOBS > | CACCC > xterm &; xterm & | CAMON > | VIS > hist 30, scale, ... | WINDS > | |
|
AFTER CHECKING WITH THE CONTROL ROOM ... Usually don't need cacor though | ||||||
| NOEL > |
CAOBS > | CACCC > cacor {TkCor GUI} {do this first} | CACCC > | CAMON > | VIS > | WINDS > |
| NOEL > | CAOBS > caobs | TKCOR > | CACCC > | CAMON > | VIS > | WINDS > |
| Assuming that the calibrator is the first source, check and correct Attenuator levels | ||||||
| NOEL > |
CAOBS > set file filename | TKCOR > | CACCC > spd | CAMON > | VIS > | WINDS > |
| NOEL > |
CAOBS > track 1 {calibrator} | TKCOR > | SPD > | CAMON > | VIS > | WINDS > |
| NOEL > | {May need to set coarse attenuation. Set to final levels
before observing} CAOBS > set coarse ca0n jklm {(0-3)} | TKCOR > | SPD > | CAMON > /stats; /samp | VIS > | WINDS > |
| When samplers are good and delays are stable | ||||||
| NOEL > cacal | CAOBS > | TKCOR > | SPD > | CAMON > | VIS > | WINDS > |
| Observe | ||||||
| NOEL > |
CAOBS > {once cacal has stopped} > stop > corr closefile > start 1/100 > ... > stop > corr closef > stow | TKCOR > | SPD > |
CAMON > |
VIS > | WINDS > |